cooling arrangement

Considered the slab surface temperature rise and the temperature drop when design of secondary cooling nozzle arrangement.

在设计二冷各段的喷嘴布置时，考虑了铸坯表面出现过大的温升和温降的问题。

Abstract This paper proposes a quasi 3 dimensional simulation method of the condenser, which can take the 3 dimensional influence caused by the variation of the cooling water temperature, and also reflect the influence of the cooling water technological process arrangement to condenser's performance.

提出了一种凝汽器的准三维模拟方法，它可以考虑冷却水温度变化产生的三维影响，也能反映冷却水流程布置对冷凝器性能的影响。

In the designing of cooling towers, the arrangement of water distribution pipes and spray nozzles is an important factor to affect the cooling results.

在冷却塔的设计中，配水管及喷头的布置是影响冷却效果的重要因素之一。

In the arrangement of closed circuit cooling system components some arrangement factors could not be fully considered by manufacturers because of various reasons aspects, causing over-heating or over-cooling in diesel engine.

在闭式循环冷却系统的零部件配置中，有些配套厂因多方面的原因，未能充分考虑配置中的有关因素，致使发生柴油机过热或过冷等现象。

The shape of cooling duct, overall arrangement, and the leak tightness are the key factors for cooling system design.

冷却管道的形状、总体布局、冷却系统密封等都是冷却机构设计的关键，也是热成形模具设计的重要技术。

The study shows that: ( 1) under the different jet-to-surface spacing, the impingement cooling with inline arrangement is better than that with staggered arrangement for a given jet-to-crossflow mass flux ratio;

结果表明：（1）在不同的射流孔与冲击靶面间距下，对于给定的射流与横流质量流量比，顺排方式的冲击冷却效果要优于叉排方式；

The Optimization Principle and Practice of Thermal/ Nuclear Power Station's Cooling Water Hydraulic Arrangement in Coastal Area

沿海水域火/核电厂冷却水水工布置的优化原则和实践